This is only a summary! Please consult the manpages and the author-supplied webpages for more detailed (and usually important) information concerning each backend.
If you have new information or corrections, please file a bug report with as many details as possible. Also please tell us if your scanner isn't mentioned in this list at all.
For an explanation of the tables, see the legend.
There are tables for scanners, still cameras, video cameras, APIs, and meta backends.
Manufacturers: Abaton, Acer Peripherals, Across Technologies, Actown, Adlib, AGFA, Ambir, Apple, Aries, Artec/Ultima, Avigramm, Avision, Bell and Howell, Benq (Acer), BlackWidow, Boeder, BrightScan, Brother, Canon, Chinon, Compaq, Compeye, Corex, Cybercom, Dell, Devcom, Dextra, E-Lux, EDGE, Enhans, Epson, Escom, Escort, Fujitsu, Gallery, Genius, Googlegear, Guillemot, Guillemot / Hercules, Hercules, Hewlett-Packard, IBM, iVina, Kodak, Komodo, Konica Minolta, LEO, Lexmark, Linotype Hell, Logitech, Medion/Lifetec/Tevion/Cytron, Memorex, Microstar, Microtek, Minolta, Minolta-QMS, Mitsubishi, Mustek, NEC, Network, Nikon, Olivetti, Olympus, Optrox, Packard Bell, Panasonic, Pentax, PIE, PIOTECH, Plustek, Primax, Prolink, Quato, Reflecta, Relisys, RevScan, Ricoh, Scanport, Sceptre, Sharp, Sicos, Siemens, Spot Technology, Syscan, Tamarack, Targa, TCE, Teco, Tiny, TriGem, Trust, UMAX, Vantas, Visioneer, Viviscan, Vobis, Vuego, Xerox
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Scan 300/GS | SCSI | complete | All known modes and functions supported |
abaton (unmaintained) |
sane-abaton |
| Scan 300/S | SCSI | untested | Untested, use with caution |
abaton (unmaintained) |
sane-abaton |
Comment: Company was renamed to Benq.
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| FS-1130 | SCSI | good | FCC ID LUZFS1130 |
leo
(1.0-10) |
sane-leo |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| ACT Scan I 30 | SCSI | untested | sub model VM3520A |
teco1
(1.0-10) |
sane-teco1 |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| JetScan630 | SCSI | good |
pie
(1.0) |
sane-pie | |
| JetScan636PRO | SCSI | untested |
pie
(1.0) |
sane-pie |
Link(s):
http://www.agfa.com/, http://www.agfa.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 1212 P | Parport | unsupported | Most probably unsupported. |
unsupported
(2005-07-30) |
? |
| Arcus 1200 | SCSI | good | Optional transparency unit supported. |
SnapScan
(1.4) |
sane-snapscan |
| Arcus II | SCSI | good | Arcus *II*, not Arcus! |
microtek
(0.13.1) |
sane-microtek |
| DuoScan | SCSI | basic |
microtek
(0.13.1) |
sane-microtek | |
| DuoScan f40 | USB IEEE-1394 | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| DuoScan T2000XL | SCSI | unsupported | Unsupported. Same as Microtek ArtixScan 2020? |
unsupported
(2005-07-30) |
? |
| DuoScan T2500 | SCSI IEEE-1384 | unsupported | Unsupported. Same as Microtek Artixscan 2500f |
unsupported
(2005-07-30) |
? |
| Focus Color | SCSI | good | 3-pass |
agfafocus (unmaintained) |
sane-agfafocus |
| Focus Color Plus | SCSI | good | 3-pass |
agfafocus (unmaintained) |
sane-agfafocus |
| Focus GS Scanner | SCSI | untested | 6 bit gray |
agfafocus (unmaintained) |
sane-agfafocus |
| Focus II | SCSI | untested | gray only |
agfafocus (unmaintained) |
sane-agfafocus |
| Focus Lineart Scanner | SCSI | untested | Lineart only? Untested. |
agfafocus (unmaintained) |
sane-agfafocus |
| SnapScan | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan 300 | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan 310 | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan 600 | SCSI | good | Optional ADF supported. |
SnapScan
(1.4) |
sane-snapscan |
| SnapScan 1212u | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan 1236s | SCSI | good | Optional ADF and transparency unit supported. |
SnapScan
(1.4) |
sane-snapscan |
| SnapScan 1236u | USB | good | Optional ADF and transparency unit supported. |
SnapScan
(1.4) |
sane-snapscan |
| SnapScan e10 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan e20 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan e25 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan e26 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan e40 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan e42 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| SnapScan e50 | USB | good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
| SnapScan e52 | USB | good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
| SnapScan e60 | USB | untested |
SnapScan
(1.4) |
sane-snapscan | |
| Snapscan Touch | USB | complete |
niash
(0.2, NEW!) |
sane-niash | |
| StudioScan | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| StudioScan II | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| StudioScan IIsi | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| Studiostar | SCSI | minimal | Is detected but scans are very dark |
microtek
(0.13.1) |
sane-microtek |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Visigo A4 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://developer.apple.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Apple Scanner | SCSI | good | 4bit, 16 shades of gray |
apple (unmaintained) |
sane-apple |
| ColorOneScanner | SCSI | minimal | truecolor (needs much work) but it scans in non color modes. |
apple (unmaintained) |
sane-apple |
| OneScanner | SCSI | basic | 8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work. |
apple (unmaintained) |
sane-apple |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Scan-It Pro 4800 | Parport (SPP, EPP) | complete | use driver-switch mov=2 |
plustek_pp
(0.43) |
sane-plustek_pp |
Link(s):
http://www.artecusa.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 1236 USB | USB | unsupported | Unsupported. Vendor/product 0x05d8/0x4001. See link for details. |
unsupported
(2005-07-30) |
? |
| A6000C | SCSI | complete | all modes working |
artec
(unmaintained) |
sane-artec |
| A6000C PLUS | SCSI | complete | f/w <= v1.92 basic, f/w >= v1.93 OK |
artec
(unmaintained) |
sane-artec |
| AM12e+ | Parport | unsupported | Unsupported. Chipset unknown. Maybe similar to SCSI version or as6e? |
unsupported
(2005-07-30) |
? |
| AM12S | SCSI | complete | all modes working |
artec
(unmaintained) |
sane-artec |
| AS6E | Parport | basic | Requires the program 'as6edriver' to run. |
as6e
(0.4.2) |
sane-as6e |
| AT3 | SCSI | complete | all modes working |
artec
(unmaintained) |
sane-artec |
| AT6 | SCSI | minimal | First scan works, subsequent fail until scanner power cycle. |
artec
(unmaintained) |
sane-artec |
| AT12 | SCSI | complete | all modes working |
artec
(unmaintained) |
sane-artec |
| E+ 48U | USB | good | CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners. |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
| E+ Pro | USB | minimal | Experimental! Different product id: 0x4004. Please report your results! |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
| Ultima 2000 | USB | good | Works, only product id 0x4002 is supported |
gt68xx
(1.0-71) |
sane-gt68xx |
| Ultima 2000 (0x4001) | USB | unsupported | Same name, but different ids: vendor/product 0x05d8/0x4001 is not supported. The scanner with product id 0x4002 is supported by the gt68xx backend. |
unsupported
(2005-07-30) |
? |
| Ultima 2000 e+ | USB | good | Works, only limited testing until now |
gt68xx
(1.0-71) |
sane-gt68xx |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Minidoc | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.avision.com, http://www.avision.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| AV100CS | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV100IIICS | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV100S | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV120 | USB | basic | sheetfed scanner |
avision
(Build: 167) |
sane-avision |
| AV210 | USB | basic | sheetfed scanner |
avision
(Build: 167) |
sane-avision |
| AV210-2 | USB | basic | sheetfed scanner |
avision
(Build: 167) |
sane-avision |
| AV220 | USB | complete | duplex! sheetfed scanner |
avision
(Build: 167) |
sane-avision |
| AV220-C2 | USB | untested | duplex! sheetfed scanner |
avision
(Build: 167) |
sane-avision |
| AV240SC | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV260CS | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV360CS | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV363CS | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV420CS | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV600U | USB | good | 1 pass, 600 dpi |
avision
(Build: 167) |
sane-avision |
| AV600U Plus | USB | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV610 | USB | good |
avision
(Build: 167) |
sane-avision | |
| AV620CS | SCSI | complete | 1 pass, 600 dpi |
avision
(Build: 167) |
sane-avision |
| AV620CS Plus | SCSI | complete | 1 pass, 1200 dpi |
avision
(Build: 167) |
sane-avision |
| AV630CS | SCSI | complete | 1 pass, 1200 dpi - regularly tested |
avision
(Build: 167) |
sane-avision |
| AV630CSL | SCSI | untested | 1 pass, 1200 dpi |
avision
(Build: 167) |
sane-avision |
| AV660S | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV680S | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV690U | SCSI | untested | 1 pass, 2400 dpi |
avision
(Build: 167) |
sane-avision |
| AV800S | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV810C | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV820 | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV820C | SCSI | good | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV820C Plus | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV830C | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV830C Plus | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV880 | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV880C | SCSI | untested | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV3200C | SCSI | complete | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV3800C | SCSI | good | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV6120 | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| AV6240 | SCSI | complete | 1 pass, ??? dpi |
avision
(Build: 167) |
sane-avision |
| AV8000S | SCSI | complete | 1 pass, 1200 dpi, A3 - regularly tested |
avision
(Build: 167) |
sane-avision |
| AV8300 | USB | complete | 1 pass, 1200 dpi, A3 - duplex! |
avision
(Build: 167) |
sane-avision |
| AV8350 | USB | complete | 1 pass, 1200 dpi, A3 - duplex! |
avision
(Build: 167) |
sane-avision |
| AVA3 | SCSI | basic | 1 pass, 600 dpi, A3 |
avision
(Build: 167) |
sane-avision |
| AVA6 | USB | untested | probably a CPU-less device |
avision
(Build: 167) |
sane-avision |
| DS310F | Parport | unsupported | Probably not supported. Scanner/printer/copier combination. |
unsupported
(2005-07-30) |
? |
| DS610CU Scancopier | USB | good | 1 pass, 600 dpi, A4 |
avision
(Build: 167) |
sane-avision |
| iVina 1600 | USB | unsupported | GL646 based, to be added to genesys backend. Same as UMAX Astra 4500. |
unsupported
(2005-07-30) |
? |
| iVina FB1800 | USB | unsupported | GL646/GL660 based. Same as UMAX Astra 4700. |
unsupported
(2005-07-30) |
? |
| iVina FB2400 | USB | unsupported | Not supported. No chipset information available. Same as UMAX Astra 6700. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.bhscanners.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| COPISCAN II 2135 | SCSI | untested | Simplex Scanner |
bh
(1.0-4) |
sane-bh |
| COPISCAN II 2137(A) | SCSI | good | Simplex Scanner (with ACE) - limited testing |
bh
(1.0-4) |
sane-bh |
| COPISCAN II 2138A | SCSI | untested | Simplex Scanner with ACE |
bh
(1.0-4) |
sane-bh |
| COPISCAN II 3238 | SCSI | untested | Simplex Scanner |
bh
(1.0-4) |
sane-bh |
| COPISCAN II 3338(A) | SCSI | untested | Simplex Scanner (with ACE) |
bh
(1.0-4) |
sane-bh |
| COPISCAN II 6338 | SCSI | good | Duplex Scanner with ACE - development model |
bh
(1.0-4) |
sane-bh |
Link(s):
http://www.benq.com
Comment: Formerly Acer Peripherals
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 300f | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| 310p | Parport | unsupported | Unsupported. No details about the protocol known. |
unsupported
(2005-07-30) |
? |
| 310s | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| 310u | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| 320p | Parport | unsupported | Unsupported. No details about the protocol known. |
unsupported
(2005-07-30) |
? |
| 320u | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| 340u | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| 610p | Parport | unsupported | Unsupported. No details about the protocol known. |
unsupported
(2005-07-30) |
? |
| 610plus | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| 610s | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| 620p | Parport | unsupported | Unsupported. No details about the protocol known. |
unsupported
(2005-07-30) |
? |
| 620pt | Parport | unsupported | Unsupported. No details about the protocol known. |
unsupported
(2005-07-30) |
? |
| 620s | SCSI | good |
SnapScan
(1.4) |
sane-snapscan | |
| 620u | USB | good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
| 640BT | USB | good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
| 640bu | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| 640p | Parport | unsupported | Unsupported. Someone is working to ge this scanner supported. See link for details. |
unsupported
(2005-07-30) |
? |
| 640u | USB | good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
| 1240 | USB | good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
| 3300 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| 4300 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| 5000 | USB | basic | Working up to 600 DPI |
SnapScan
(1.4) |
sane-snapscan |
| 5300 | USB | basic | Problems with firmware upload reported |
SnapScan
(1.4) |
sane-snapscan |
Link(s):
http://www.blackwidow.co.uk/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| BW4800SP | SCSI | complete | rebadged Artec AT3 |
artec
(unmaintained) |
sane-artec |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Sm@rtScan Office | Parport USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Sm@rtScan Slim Edition | USB | good | Similar to Artec Ultima 2000 |
gt68xx
(1.0-71) |
sane-gt68xx |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| BrighScan OpticPro | Parport (SPP, EPP) | complete | Reported as P12 |
plustek_pp
(0.43) |
sane-plustek_pp |
Link(s):
http://www.brother.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| MFC 4600 | Parport USB | unsupported | Unsupported. However there is a project to support this scanner/printer/fax combination. See link. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.canon.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| CanoScan 300 | SCSI | good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon |
| CanoScan 600 | SCSI | good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon |
| CanoScan 620S | SCSI | good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon |
| CanoScan 1200S | SCSI | good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon |
| CanoScan 2700F | SCSI | good | 1 pass; film scanner |
canon
(1.12) |
sane-canon |
| CanoScan 2710S | SCSI | good | 1 pass; 36bit film scanner |
canon
(1.12) |
sane-canon |
| CanoScan 3000 | USB | unsupported | GL660+GL646 based. |
unsupported
(2005-07-30) |
? |
| CanoScan 3000ex | USB | unsupported | GL660+GL646 based. |
unsupported
(2005-07-30) |
? |
| CanoScan 3000F | USB | unsupported | GL660+GL646 based. |
unsupported
(2005-07-30) |
? |
| CanoScan 3200F | USB | unsupported | Probably unsupported. See link. |
unsupported
(2005-07-30) |
? |
| CanoScan 4200F | USB | unsupported | Probably unsupported. See link. |
unsupported
(2005-07-30) |
? |
| CanoScan 5000F | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| CanoScan 5200F | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| CanoScan 8000F | USB | unsupported | Not supported. USB Vendor/product 0x04a9/0x220f. See link for more information. With transparency adapter. |
unsupported
(2005-07-30) |
? |
| CanoScan 8400F | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| CanoScan 9900F | USB | unsupported | Probably unsupported, similar to 8000F. Vendor/product 0x04a9/0x2210. 3200x6400 dpi USB2. With transparency adapter. |
unsupported
(2005-07-30) |
? |
| CanoScan D646U | USB | unsupported | Probably not supported. USB Vendor/product 0x04a9/0x220b. See link for more information and test program. |
unsupported
(2005-07-30) |
? |
| CanoScan D646U ex | USB | unsupported | Probably not supported. See D646. |
unsupported
(2005-07-30) |
? |
| CanoScan D660U | USB | good | TPA scans not perfect |
plustek
(0.49) |
sane-plustek |
| CanoScan D1250U2 | USB | unsupported | Not supported. However, someone started working on this scanner and some information is available (see link). |
unsupported
(2005-07-30) |
? |
| CanoScan D2400UF | USB | unsupported | Not supported. See link. |
unsupported
(2005-07-30) |
? |
| CanoScan FB310P | Parport (ECP) | unsupported | Rebadged Avision, different command set |
canon_pp
(0.33) |
sane-canon_pp |
| CanoScan FB320P | Parport (ECP) | basic | Newly added support |
canon_pp
(0.33) |
sane-canon_pp |
| CanoScan FB330P | Parport (ECP) | good |
canon_pp
(0.33) |
sane-canon_pp | |
| CanoScan FB610P | Parport (ECP) | unsupported | Rebadged Avision, different command set |
canon_pp
(0.33) |
sane-canon_pp |
| CanoScan FB620P | Parport (ECP) | basic | Newly added support |
canon_pp
(0.33) |
sane-canon_pp |
| CanoScan FB620U | USB | unsupported | Probably not supported. Vendor/product 0x4a9/0x2202. Some information is available. |
unsupported
(2005-07-30) |
? |
| CanoScan FB630P | Parport (ECP) | good |
canon_pp
(0.33) |
sane-canon_pp | |
| CanoScan fb630u | USB | good | OK |
canon630u
(0.1) |
sane-canon630u |
| CanoScan fb636u | USB | untested | hopefully works |
canon630u
(0.1) |
sane-canon630u |
| CanoScan FB1210U | USB | unsupported | Not supported. Vendor/product 0x4a9/0x2205. However, a stand-alone program for FreeBSD is available. |
unsupported
(2005-07-30) |
? |
| CanoScan LiDE 35 | USB | unsupported | GL841 based, to be added to genesys backend. Same as LiDE 50. |
unsupported
(2005-07-30) |
? |
| CanoScan LiDE 40 | USB | unsupported | GL841 based, to be added to genesys backend. Same as LiDE 50. |
unsupported
(2005-07-30) |
? |
| CanoScan LiDE 50 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| CanoScan LiDE 80 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| CanoScan LiDE 500F | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| CanoScan LiDE20 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| CanoScan LiDE30 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| CanoScan N340P | Parport (ECP) | good |
canon_pp
(0.33) |
sane-canon_pp | |
| CanoScan N640P | Parport (ECP) | good |
canon_pp
(0.33) |
sane-canon_pp | |
| CanoScan N640P ex | Parport (ECP) | good | Just an N640P in a different box? |
canon_pp
(0.33) |
sane-canon_pp |
| CanoScan N650U/N656U | USB | complete |
plustek
(0.49) |
sane-plustek | |
| CanoScan N670U/N676U | USB | complete |
plustek
(0.49) |
sane-plustek | |
| CanoScan N1220U | USB | complete |
plustek
(0.49) |
sane-plustek | |
| CanoScan N1240U | USB | complete |
plustek
(0.49) |
sane-plustek | |
| DR-2080C | USB SCSI | unsupported | Probably not supported. Pass-trough (ADF) scanner. |
unsupported
(2005-07-30) |
? |
| DR-3020C | SCSI | unsupported | Not supported. High-speed pass-trough (ADF) scanner. |
unsupported
(2005-07-30) |
? |
| DR-3060 | SCSI | unsupported | Probably not supported. High-speed pass-trough (ADF) scanner. |
unsupported
(2005-07-30) |
? |
| DR-3080C | SCSI | unsupported | Probably not supported. High-speed pass-trough (ADF) color scanner. |
unsupported
(2005-07-30) |
? |
| DR-6080 | USB SCSI | unsupported | Probably not supported. High-speed pass-trough (ADF) scanner. |
unsupported
(2005-07-30) |
? |
| DR-9080C | SCSI | unsupported | Probably not supported. High-speed pass-trough (ADF) color scanner. Similar to DR-6080C, but can scan in color. |
unsupported
(2005-07-30) |
? |
| FS4000 | USB SCSI | unsupported | Not supported. USB Vendor/product 0x04a9/0x3042. See link for more details. |
unsupported
(2005-07-30) |
? |
| IS 12 | USB | unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2005-07-30) |
? |
| IS 22 | Parport | unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2005-07-30) |
? |
| IS 32 | USB | unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2005-07-30) |
? |
| IS 52 | ? | unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2005-07-30) |
? |
| PIXMA MP110 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DS-3000 | Parport Serial Port | unsupported | Unsupported at the moment, but a backend is in preparation. See link. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.compaq.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| S4-100 | USB | complete | Identical to UMAX 3400 |
plustek
(0.49) |
sane-plustek |
| S200 | USB | unsupported | Not supported. 2400x1200 dpi. Vendor=0x049f, Product=0x0021. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00 |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Simplex 1236C | Parport USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.cardscan.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Cardscan 500 | USB | unsupported | Probably not supported. Businesscard reader. Vendor/product: 0x08f0/0x0001. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 9352 | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.dell.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 922 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| 1600n | USB Ethernet | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| A920 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| A960 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.blackwidow.co.uk/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 9630S | SCSI | untested |
pie
(1.0) |
sane-pie | |
| 9636PRO | SCSI | good |
pie
(1.0) |
sane-pie | |
| 9636S | SCSI | untested |
pie
(1.0) |
sane-pie |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DF-600P | SCSI | good | sub model VM3510 |
teco1
(1.0-10) |
sane-teco1 |
| DF-1200T+ | SCSI | untested | sub model VM3530+ |
teco1
(1.0-10) |
sane-teco1 |
| DF-4830T | SCSI | untested | sub model VM4542 |
teco1
(1.0-10) |
sane-teco1 |
| DF-9624 | SCSI | untested | sub model VM6530+ |
teco1
(1.0-10) |
sane-teco1 |
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| j-6121 | Parport | unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| KTX-9600US | SCSI | untested | no feedback |
umax
(1.0-41) |
sane-umax |
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| j-6121 | Parport | unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
(2005-07-30) |
? |
| M-3630 A | Parport | unsupported | Probably unsupported. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.epson.com/, http://www.epson.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Actionscanner II | SCSI Parport | good | US version of GT-5000 |
epson
(0.2.42) |
sane-epson |
| CX-3200 | USB | good |
epson
(0.2.42) |
sane-epson | |
| CX-3600 | USB | good |
epson
(0.2.42) |
sane-epson | |
| CX-3650 | USB | good |
epson
(0.2.42) |
sane-epson | |
| CX-4600 | USB | good |
epson
(0.2.42) |
sane-epson | |
| CX-5200 | USB | good |
epson
(0.2.42) |
sane-epson | |
| CX-5400 | USB | good |
epson
(0.2.42) |
sane-epson | |
| CX-6400 | USB | good |
epson
(0.2.42) |
sane-epson | |
| ES-300C | SCSI Parport | good | US version of GT-6000 |
epson
(0.2.42) |
sane-epson |
| ES-600C | Parport | good | US version of GT-6500 |
epson
(0.2.42) |
sane-epson |
| ES-1200C | Parport | good | US version of GT-9000 |
epson
(0.2.42) |
sane-epson |
| ES-8500 | SCSI | good |
epson
(0.2.42) |
sane-epson | |
| Expression 636 | SCSI | complete | US version of GT-9500 |
epson
(0.2.42) |
sane-epson |
| Expression 800 | SCSI | complete |
epson
(0.2.42) |
sane-epson | |
| Expression 1600 | SCSI USB IEEE-1394 | complete |
epson
(0.2.42) |
sane-epson | |
| Expression 1680 | SCSI USB IEEE-1394 | complete |
epson
(0.2.42) |
sane-epson | |
| FilmScan 200 | SCSI | unsupported | A better backend for the FilmScan 200 can be found at http://www.vjet.demon.co.uk/scanner/ |
epson
(0.2.42) |
sane-epson |
| GT-5000 | SCSI Parport | good |
epson
(0.2.42) |
sane-epson | |
| GT-5500 | SCSI | good |
epson
(0.2.42) |
sane-epson | |
| GT-6000 | SCSI Parport | good |
epson
(0.2.42) |
sane-epson | |
| GT-6500 | Parport | good |
epson
(0.2.42) |
sane-epson | |
| GT-7000 | SCSI | good |
epson
(0.2.42) |
sane-epson | |
| GT-8000 | SCSI | good |
epson
(0.2.42) |
sane-epson | |
| GT-F600 | USB | unsupported | Unsupported. Doesn't speak ESC/I. Closely related to the GT-9400. It will be supported by epkowa backeend in future. |
unsupported
(2005-07-30) |
? |
| Perfection 600 | SCSI | good | OK, SCSI-ID=EPSON Perfection600 |
umax
(1.0-41) |
sane-umax |
| Perfection 610 | USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 636S | SCSI | complete | US version of GT-7000 |
epson
(0.2.42) |
sane-epson |
| Perfection 636U | USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 640 | USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 660 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| Perfection 1200Photo | USB | complete | with TPU |
epson
(0.2.42) |
sane-epson |
| Perfection 1200S | SCSI | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 1200U | USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 1240 | SCSI USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 1250 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| Perfection 1250Photo | USB | good | TPA scans not perfect |
plustek
(0.49) |
sane-plustek |
| Perfection 1260 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| Perfection 1260Photo | USB | good | TPA scans not perfect |
plustek
(0.49) |
sane-plustek |
| Perfection 1270 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| Perfection 1640 | SCSI USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 1650 | USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 1660 | USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 1670 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| Perfection 2400 | USB | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 2450 | USB IEEE-1394 | complete |
epson
(0.2.42) |
sane-epson | |
| Perfection 2480 | USB | good |
SnapScan
(1.4) |
sane-snapscan | |
| Perfection 2580 | USB | basic | Problems with preview scans reported, unplugging transparency unit seems to help |
SnapScan
(1.4) |
sane-snapscan |
| Perfection 3200 | USB | complete | US version of the GT-9800 |
epson
(0.2.42) |
sane-epson |
| Perfection 4180 | USB | unsupported | Unsupported. Doesn't speak ESC/I. Closely related to the GT-9400. It will be supported by epkowa backeend in future. |
unsupported
(2005-07-30) |
? |
| Perfection 4870 | USB | complete | US version of the GT-9800 |
epson
(0.2.42) |
sane-epson |
| RX-425 | USB | good |
epson
(0.2.42) |
sane-epson | |
| RX-500 | USB | good |
epson
(0.2.42) |
sane-epson | |
| RX-600 | USB | good |
epson
(0.2.42) |
sane-epson |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Image Scanner 256 | SCSI | good | OK, SCSI-ID=UMAX UG 80 |
umax
(1.0-41) |
sane-umax |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Galleria 600 | SCSI | untested | untested, SCSI-ID=ESCORT Galleria 600S |
umax
(1.0-41) |
sane-umax |
Link(s):
http://www.fujitsu.com, http://www.fujitsu.com/services/computing/peripheral/scanners/product/, http://www.fujitsu.com/, http://www.fcpa.fujitsu.com/products/scanners/, http://www.fujitsu.ca/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 1200CUS | USB | basic | Works, but is slow. Maybe a Mustek BearPaw 2400 CU clone? |
gt68xx
(1.0-71) |
sane-gt68xx |
| fi-4010C | USB | unsupported | Unsupported. Vendor/product: 0x04c5, 0x1029. Maybe similar to fi-4220C? |
unsupported
(2005-07-30) |
? |
| fi-4110CU | USB | unsupported | Unsupported. Vendor/product unknown. Maybe similar to fi-4220C? |
unsupported
(2005-07-30) |
? |
| fi-4110EOX2 | USB | unsupported | Uses ma1509 chip, but very different from other scanners supported by backend |
ma1509
(1.0-3) |
sane-ma1509 |
| fi-4120C | SCSI USB | basic |
fujitsu (1.12) |
sane-fujitsu | |
| fi-4220C | SCSI USB | basic |
fujitsu (1.12) |
sane-fujitsu | |
| fi-4340C | SCSI | basic | Color scans are inverted, Flatbed option is enabled |
fujitsu (1.12) |
sane-fujitsu |
| fi-4530C | SCSI USB | basic | USB untested |
fujitsu (1.12) |
sane-fujitsu |
| M3091DCd | SCSI | good |
fujitsu (1.12) |
sane-fujitsu | |
| M3092DCd | SCSI | good |
fujitsu (1.12) |
sane-fujitsu | |
| M3093GDim | SCSI | good |
fujitsu (1.12) |
sane-fujitsu | |
| M3093GXim | SCSI | good |
fujitsu (1.12) |
sane-fujitsu | |
| M3096G | SCSI | good |
fujitsu (1.12) |
sane-fujitsu | |
| M4097 | SCSI | good |
fujitsu (1.12) |
sane-fujitsu | |
| ScanPartner | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| ScanPartner 10 | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| ScanPartner 10C | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| ScanPartner 15C | SCSI | good |
sp15c (unmaintained) |
sane-sp15c | |
| ScanPartner 93GX | SCSI | good |
fujitsu (1.12) |
sane-fujitsu | |
| ScanPartner 300C | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| ScanPartner 600C | SCSI | good |
sp15c (unmaintained) |
sane-sp15c | |
| ScanPartner 620C | SCSI | good |
avision
(Build: 167) |
sane-avision | |
| ScanPartner Jr | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| ScanStation | SCSI | untested |
avision
(Build: 167) |
sane-avision |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 4800 | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.genius-kye.com/, http://www.geniusmouse.co.uk/, http://www.geniusnet.com.tw/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| ColorPage HR6 V1 | USB | basic |
u12
(0.02) |
sane-u12 | |
| Colorpage HR6 V2 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| Colorpage HR6A | USB | untested |
plustek
(0.49) |
sane-plustek | |
| Colorpage HR6X | USB | untested |
plustek
(0.49) |
sane-plustek | |
| Colorpage HR6X EPP | Parport (SPP, EPP) | good | Negative scanning does not work correctly |
plustek_pp
(0.43) |
sane-plustek_pp |
| ColorPage HR6X Slim | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| Colorpage HR7 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| Colorpage HR7LE | USB | untested |
plustek
(0.49) |
sane-plustek | |
| ColorPage HR7X | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ColorPage HR8 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| Colorpage Vivid 1200 XE | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| ColorPage Vivid III USB | USB | untested | Note: Device has Plustek vendor and product ID (0x07b3/0x0001) |
u12
(0.02) |
sane-u12 |
| Colorpage Vivid III V2 | Parport (SPP, EPP) | complete | Reported as PT12 |
plustek_pp
(0.43) |
sane-plustek_pp |
| Colorpage Vivid Pro II Film | Parport (SPP, EPP) | complete | Reported as OP9636T/12000T |
plustek_pp
(0.43) |
sane-plustek_pp |
| Colorpage Vivid3 V2 | USB | good | Same as Colorpage Vivid3x |
gt68xx
(1.0-71) |
sane-gt68xx |
| Colorpage Vivid3x | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| Colorpage Vivid3xe | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| Colorpage Vivid4 | USB | good | Works. |
gt68xx
(1.0-71) |
sane-gt68xx |
| Colorpage Vivid4x | USB | good | Works. |
gt68xx
(1.0-71) |
sane-gt68xx |
| Colorpage Vivid4xe | USB | basic | Should work but has limited testing. Please contact me if you own such a device. |
gt68xx
(1.0-71) |
sane-gt68xx |
| ColorPage-EP | Parport | good |
microtek2
(0.96) |
sane-microtek2 | |
| ColorPage-HR5 (Pro) | SCSI | good | OK, SCSI-ID=KYE ColorPage-HR5 |
umax
(1.0-41) |
sane-umax |
| ColorPage-SF600 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ColorPage-Slim 1200 USB2 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Colorpage-SP2 | SCSI | good | Same as Microtek Scanmaker E3 |
microtek
(0.13.1) |
sane-microtek |
| FS-1130 Colorpage Scanner | SCSI | good |
leo
(1.0-10) |
sane-leo |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 2000 | USB | good | Same as Artec Ultima 2000. |
gt68xx
(1.0-71) |
sane-gt68xx |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Maxi Scan A4 Parallel 36 bit | Parport | unsupported | Probably unsupported. Identical to the Benq Prisa 620P. |
unsupported
(2005-07-30) |
? |
| SCAN@HOME 48 USB | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.guillemot.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Maxi A4 36 bit | USB | good | Rebadged Benq 620U, needs Benq firmware file u96v???.bin |
SnapScan
(1.4) |
sane-snapscan |
| Maxi Scan A4 Deluxe (SCSI) | SCSI | good | Rebadged SnapScan 310s. |
SnapScan
(1.4) |
sane-snapscan |
| Maxi Scan A4 USB 640U | USB | good | Rebadged Benq 640U. |
SnapScan
(1.4) |
sane-snapscan |
| Scan@home Touch 1248 (USB) | USB | good | Rebadged Benq 3300. |
SnapScan
(1.4) |
sane-snapscan |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| SCAN@HOME 48 USB | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.hp.com, http://www.hp.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| HP3500C | USB | unsupported | Doesn't work yet but support by the hp_rts88x backend is planned. |
unsupported
(2005-07-30) |
? |
| HP3530C | USB | unsupported | Doesn't work yet but support by the hp_rts88x backend is planned. |
unsupported
(2005-07-30) |
? |
| HP3570C | USB | unsupported | Doesn't work yet but support by the hp_rts88x backend is planned. |
unsupported
(2005-07-30) |
? |
| Photo Scanner 1000 | USB | unsupported | Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for devices data. |
unsupported
(2005-07-30) |
? |
| Photosmart 1200 Photo | USB | unsupported | Probably not supported by SANE. No details known. 10x15 cm. Maybe similar to Photo Scanner 1000? |
unsupported
(2005-07-30) |
? |
| PhotoSmart PhotoScanner | SCSI | complete |
hp
(1.06) |
sane-hp | |
| Photosmart S20 (C5101A) | USB | unsupported | Not supported yet by SANE, but a backend is under development. See link for details. |
unsupported
(2005-07-30) |
? |
| Photosmart S20xi (C7150A) | USB | unsupported | Not supported yet by SANE, but a backend is under development. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanJet 3c | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 3p | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 4c | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 4p | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 5p | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 5s | Parport (EPP) | minimal | Requires libieee1284 library. Only gray mode. |
hpsj5s
(0.03) |
sane-hpsj5s |
| ScanJet 2100C | USB | complete |
plustek
(0.49) |
sane-plustek | |
| ScanJet 2200C | USB | complete |
plustek
(0.49) |
sane-plustek | |
| ScanJet 2300C | USB | complete | 600x1200 dpi max |
genesys (1.0) |
sane-genesys |
| ScanJet 2400c | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| Scanjet 3200C | Parport (EPP/ECP) | good | works (relabelled 1220P and 2000P) |
umax_pp
(1) |
sane-umax_pp |
| ScanJet 3300c | USB | complete |
niash
(0.2, NEW!) |
sane-niash | |
| ScanJet 3400c | USB | complete | If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
(0.2, NEW!) |
sane-niash |
| ScanJet 3670c | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ScanJet 3690c | USB | unsupported | Probably GL646_HP based, maybe can be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ScanJet 3970c | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanJet 4070 Photosmart | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanJet 4100C | USB | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 4300c | USB | complete | If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
(0.2, NEW!) |
sane-niash |
| ScanJet 4500C | USB | unsupported | Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ScanJet 4570C | USB | unsupported | Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ScanJet 4600 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanJet 4670 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanJet 5100C | Parport | complete | Requires ppscsi driver and epst module |
hp
(1.06) |
sane-hp |
| ScanJet 5200C | Parport USB | complete | Parallel interface requires ppscsi driver and epst module |
hp
(1.06) |
sane-hp |
| ScanJet 5300C | USB | complete | 1 pass, 2400 dpi - regularly tested - some FW revisions have x-axis image scaling problems over 1200 dpi |
avision
(Build: 167) |
sane-avision |
| ScanJet 5370C | USB | basic | 1 pass, 2400 dpi - some FW revisions have x-axis image scaling problems over 1200 dpi |
avision
(Build: 167) |
sane-avision |
| ScanJet 5400c | USB | basic |
hp5400
(1.0-2) |
sane-hp5400 | |
| ScanJet 5470c | USB | basic |
hp5400
(1.0-2) |
sane-hp5400 | |
| ScanJet 5490c | USB | basic |
hp5400
(1.0-2) |
sane-hp5400 | |
| ScanJet 5500C | USB | unsupported | Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ScanJet 5530C Photosmart | USB | unsupported | Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ScanJet 5550C | USB | unsupported | Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
(2005-07-30) |
? |
| ScanJet 5590 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanJet 6100C | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 6200C | SCSI USB | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 6250C | SCSI USB | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 6300C | SCSI USB | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 6350C | SCSI USB | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 6390C | SCSI USB | complete |
hp
(1.06) |
sane-hp | |
| ScanJet 7400c | USB | good | 1 pass, 2400 dpi - dual USB/SCSI interface |
avision
(Build: 167) |
sane-avision |
| ScanJet 7450c | USB | good | 1 pass, 2400 dpi - dual USB/SCSI interface - regularly tested |
avision
(Build: 167) |
sane-avision |
| ScanJet 7490c | USB | good | 1 pass, 1200 dpi - dual USB/SCSI interface |
avision
(Build: 167) |
sane-avision |
| ScanJet 8200 | USB | good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 167) |
sane-avision |
| ScanJet 8250 | USB | good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 167) |
sane-avision |
| ScanJet 8290 | USB | good | 1 pass, 4800 (?) dpi - USB 2.0 and SCSI - only SCSI tested so far |
avision
(Build: 167) |
sane-avision |
| ScanJet IIc | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet IIcx | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet IIp | SCSI | complete |
hp
(1.06) |
sane-hp | |
| ScanJet Plus | Propietary | complete | Driver for HP parallel interface card required |
hp
(1.06) |
sane-hp |
Link(s):
http://www.ibm.com/, http://www.ibm.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 2456 | SCSI | basic | Was reported to work long time ago. Reports are welcome. |
ibm
(1.0-4) |
sane-ibm |
| ADF Color Scanner | Proprietary | unsupported | Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF? |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 1200U | USB | untested |
avision
(Build: 167) |
sane-avision |
Link(s):
http://www.kodak.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| i30 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| i30 | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| i40 | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| i50 | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| i60 | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| i80 | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| Snapshot Photo Scanner 1 | Parport | unsupported | Unsupported. FCC ID HWF96PHS |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.komodo.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| S1200 | SCSI | untested | rebadged Sceptre S1200 |
sceptre
(1.0-10) |
sane-sceptre |
Link(s):
http://www.konicaminolta.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DiMAGE Scan Elite 5400 | USB IEEE-1394 | unsupported | Probably unsupported. May work with vuescan. See link for details. |
unsupported
(2005-07-30) |
? |
| DiMAGE Scan Elite 5400 2 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| DiMAGE Scan Multi Pro | IEEE-1394 | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Dual Scan III | USB | unsupported | Unsupported. May work with vuescan. See link for details. |
unsupported
(2005-07-30) |
? |
| Dual Scan IV | USB | unsupported | Unsupported. Works with vuescan. See link for details. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| LEOScan S3 | SCSI | good | FCC ID LUZFS1130 |
leo
(1.0-10) |
sane-leo |
Link(s):
http://www.lexmark.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Photo 3150 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| X70 | USB | good | Works, some resolutions fail at 16 bit |
gt68xx
(1.0-71) |
sane-gt68xx |
| X73 | USB | good | Works, some resolutions fail at 16 bit, same as X70 |
gt68xx
(1.0-71) |
sane-gt68xx |
| X74 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| X75 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| X75 PrinTrio | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| X83 | USB | unsupported | Unsupported. Vendor/product 0x043d/0x003d. GL640. |
unsupported
(2005-07-30) |
? |
| X1130 | USB | unsupported | Unsupported. |
unsupported
(2005-07-30) |
? |
| X1150 | USB | unsupported | Unsupported. |
unsupported
(2005-07-30) |
? |
| X1180 | USB | unsupported | Unsupported. |
unsupported
(2005-07-30) |
? |
| X1185 | USB | unsupported | Unsupported. |
unsupported
(2005-07-30) |
? |
| X5130 | USB | unsupported | Unsupported. |
unsupported
(2005-07-30) |
? |
| X5250 | USB | unsupported | Unsupported. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.heidelberg.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Jade | SCSI | good | OK, SCSI-ID=LinoHell JADE |
umax
(1.0-41) |
sane-umax |
| Jade | SCSI | good | OK, SCSI-ID=LinoHell Office |
umax
(1.0-41) |
sane-umax |
| Jade2 | SCSI | good | OK, SCSI-ID=LinoHell Office2 |
umax
(1.0-41) |
sane-umax |
| Linoscan 1400 | SCSI | good | OK, SCSI-ID=HDM LS4H1S |
umax
(1.0-41) |
sane-umax |
| Opal | SCSI | untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax |
| Opal Ultra | SCSI | untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax |
| Opal2 | SCSI | good | OK; SCSI-ID=LinoHell OPAL2 |
umax
(1.0-41) |
sane-umax |
| Saphir | SCSI | untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax |
| Saphir HiRes | SCSI | untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax |
| Saphir Ultra | SCSI | untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax |
| Saphir Ultra II | SCSI | good | OK, SCSI-ID=Linotype SAPHIR4 |
umax
(1.0-41) |
sane-umax |
| Saphir2 | SCSI | good | OK, SCSI-ID=LinoHell SAPHIR2 |
umax
(1.0-41) |
sane-umax |
| Saphir3 | SCSI | good | OK, SCSI-ID=LinoHell SAPHIR3 |
umax
(1.0-41) |
sane-umax |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| PageScan Color | Parport | unsupported | Most probably unsupported. |
unsupported
(2005-07-30) |
? |
| PageScan USB | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.medion.com, http://www.medion.com/, http://www.medion.de/
Comment: Sold by Aldi and Tchibo.
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| LT 9452 | USB | good | Similar to Mustek ScanExpress 1200 UB Plus |
gt68xx
(1.0-71) |
sane-gt68xx |
| MD 4394 | USB | good | Product id 0x4002. If you have 0x4003, use artec_eplus48u backend. |
gt68xx
(1.0-71) |
sane-gt68xx |
| MD 6190 | USB | unsupported | Probably unsupported. There seem to exist two different scanners with that name. See link for details. |
unsupported
(2005-07-30) |
? |
| MD 9458 | USB | good | Similar to Artec Ultima 2000 (e+?) |
gt68xx
(1.0-71) |
sane-gt68xx |
| MD 9848 | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
| MD 40420 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| MD 41260 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| MD 41985 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| MD 42666 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| MD 90009 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| MD/LT 935x | Parport (EPP) | good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| MD/LT 985x | Parport (EPP) | good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| MD/LT 9375 | USB | untested | Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test. |
gt68xx
(1.0-71) |
sane-gt68xx |
| MD/LT 9385 | USB | good | Similar to Artec Ultima 2000 |
gt68xx
(1.0-71) |
sane-gt68xx |
| MD/LT 9890 | Parport (EPP) | good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| MD4394 | USB | good | Only scanners with product id 0x4003 will work; try the gt68xx backend, if your scanner has product id 0x4002 |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
| MD5345 | USB | good | Has a Primax USB ID |
genesys (1.0) |
sane-genesys |
| MD6228 | USB | good | Has a Primax USB ID. Same as MD5345 |
genesys (1.0) |
sane-genesys |
| MD6471 | USB | complete | Has a Primax USB ID. Same as MD5345 |
genesys (1.0) |
sane-genesys |
| MD9693 | USB | good |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u | |
| MD9705 | USB | good |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
Link(s):
http://www.artecusa.com/, http://www.memorex.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 6136u | USB | unsupported | Probably unsupported. |
unsupported
(2005-07-30) |
? |
| 6142u | USB | unsupported | Probably unsupported. Same as Visioneer Onetouch 4400. See link for details. |
unsupported
(2005-07-30) |
? |
| MaxxScan 6122 | USB Parport | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| MEM 48U | USB | good | Different product id: 0x4005 |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
| SCF 9612P | Parport | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.microstar.de/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| MR 9791 | USB | good |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
Link(s):
http://www.microtek.com/
Comment: Microtek makes a wide variety of devices.
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| ArtixScan 2020 | SCSI | unsupported | Unsupported. Same as Agfa DuoScan T2000XL? |
unsupported
(2005-07-30) |
? |
| Artixscan 2500f | SCSI IEEE-1384 | unsupported | Unsupported. Same as Agfa DuoScan T2500? |
unsupported
(2005-07-30) |
? |
| ArtixScan 4000tf | USB | unsupported | Unsupported. Uses ALI M5611B. |
unsupported
(2005-07-30) |
? |
| Color PageWiz | SCSI (Parport) | basic | sheet-fed (preliminary, see mapage) |
microtek
(0.13.1) |
sane-microtek |
| FilmScan 35 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Phantom 330CX | Parport | complete |
microtek2
(0.96) |
sane-microtek2 | |
| Phantom 636 | SCSI | complete |
microtek2
(0.96) |
sane-microtek2 | |
| Phantom 636CX | Parport | complete |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker 5 | SCSI | unsupported | Probably unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| Scanmaker 35 | SCSI | good | slide-scanner |
microtek
(0.13.1) |
sane-microtek |
| Scanmaker 35t+ | SCSI | good | slide-scanner |
microtek
(0.13.1) |
sane-microtek |
| Scanmaker 45t | SCSI | good | slide-scanner |
microtek
(0.13.1) |
sane-microtek |
| ScanMaker 330 | SCSI | basic |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker 336 CX | SCSI | unsupported | Probably unsupported. Seems to be similar to the Microtek 330 CX and is detected by the microtek2 backend. Scanning doesn't seem to work however. |
unsupported
(2005-07-30) |
? |
| Scanmaker 600G(S) | SCSI | basic | gray only (see manpage) |
microtek
(0.13.1) |
sane-microtek |
| Scanmaker 600Z(S) | SCSI | untested |
microtek
(0.13.1) |
sane-microtek | |
| ScanMaker 630 | SCSI | basic |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker 636 | SCSI | complete |
microtek2
(0.96) |
sane-microtek2 | |
| Scanmaker 1850S | SCSI | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 3600 | USB | basic | works |
sm3600
(0.1) |
sane-sm3600 |
| ScanMaker 3630 | USB | unsupported | Unsupported. Doesn't seem to be compatible to 3600 series, see link. |
unsupported
(2005-07-30) |
? |
| ScanMaker 3700 | USB | basic | works |
sm3600
(0.1) |
sane-sm3600 |
| ScanMaker 3750 | USB | basic | works (told) |
sm3600
(0.1) |
sane-sm3600 |
| ScanMaker 3800 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 3830 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 3840 | USB | good | 8 and 16 bit, color and grayscale |
sm3840
(1.1, NEW!) |
sane-sm3840 |
| ScanMaker 4700 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 4800 | USB | good | Same hardware as SM3840, different color box |
sm3840
(1.1, NEW!) |
sane-sm3840 |
| ScanMaker 4850 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 4900 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 5600 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 5700 | USB | unsupported | Unsupported. Uses ALI M5615 like the ScanMaker 4700. |
unsupported
(2005-07-30) |
? |
| ScanMaker 5800 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 5900 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 6000 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 6100 | USB | unsupported | Unsupported. See link for more details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 6700 | USB IEEE-1394 | unsupported | Unsupported. See link. |
unsupported
(2005-07-30) |
? |
| ScanMaker 8700 | USB IEEE-1394 | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ScanMaker 9600XL | USB SCSI IEEE-1394 | unsupported | Probably unsupported. |
unsupported
(2005-07-30) |
? |
| ScanMaker 9600XL | SCSI | good | only flatbed mode ? |
microtek2
(0.96) |
sane-microtek2 |
| ScanMaker 9800XL | USB SCSI IEEE-1394 | unsupported | Unsupported. See link. |
unsupported
(2005-07-30) |
? |
| Scanmaker E2 | SCSI | good | 3-pass |
microtek
(0.13.1) |
sane-microtek |
| Scanmaker E3 | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| ScanMaker E3plus | SCSI | complete |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker E3plus | Parport | complete |
microtek2
(0.96) |
sane-microtek2 | |
| Scanmaker E6 | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| ScanMaker i320 | USB | unsupported | Unsupported. See link. |
unsupported
(2005-07-30) |
? |
| Scanmaker II | SCSI | good | 3-pass |
microtek
(0.13.1) |
sane-microtek |
| Scanmaker IIG | SCSI | good | gray only |
microtek
(0.13.1) |
sane-microtek |
| Scanmaker IIHR | SCSI | good | 3-pass |
microtek
(0.13.1) |
sane-microtek |
| Scanmaker III | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| Scanmaker IISP | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| ScanMaker s400 | USB | unsupported | Unsupported. See link. |
unsupported
(2005-07-30) |
? |
| ScanMaker V6USL | USB | complete |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker V6USL | SCSI | complete |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker V300 | Parport | good |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker V300 | SCSI | good |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker V310 | Parport | basic |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker V310 | SCSI | basic |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker V600 | Parport | basic |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker V600 | SCSI | basic |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker X6 | SCSI | complete |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker X6EL | SCSI | basic |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker X6USB | USB | good |
microtek2
(0.96) |
sane-microtek2 | |
| ScanMaker X12USL | SCSI | good | only Flatbed mode ? |
microtek2
(0.96) |
sane-microtek2 |
| ScanPort 3000 | USB | unsupported | Unsupported. Vendor/Product ids: 0x04a7/0x0224. Realtek RTS8801B?. See link for details. |
unsupported
(2005-07-30) |
? |
| SlimScan C3 | Parport | complete |
microtek2
(0.96) |
sane-microtek2 | |
| SlimScan C6 | USB | complete |
microtek2
(0.96) |
sane-microtek2 |
Link(s):
http://www.minolta.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Dimage Scan Dual I | SCSI | basic |
avision
(Build: 167) |
sane-avision | |
| Dimage Scan Dual II | USB | good | 1 pass, film-scanner |
avision
(Build: 167) |
sane-avision |
| Dimage Scan Dual III | USB | basic | 1 pass, film-scanner |
avision
(Build: 167) |
sane-avision |
| Elite II | USB | untested | 1 pass, film-scanner |
avision
(Build: 167) |
sane-avision |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| SC-110 | USB | untested |
avision
(Build: 167) |
sane-avision | |
| SC-215 | USB | good |
avision
(Build: 167) |
sane-avision |
Link(s):
http://www.mitsubishi.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Diamondview 648UT | USB | good | Rebadged Benq 320u. |
SnapScan
(1.4) |
sane-snapscan |
| Diamondview 650U | USB | good | Rebadged Benq 4300. |
SnapScan
(1.4) |
sane-snapscan |
| MCA-ADFC | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| S600C | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| S1200C | SCSI | untested |
avision
(Build: 167) |
sane-avision | |
| SS600 | SCSI | good |
avision
(Build: 167) |
sane-avision |
Link(s):
http://www.mustek.com/, http://www.mustek.com.tw/, http://www.mustek.de/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 96 CP | Parport (EPP) | good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| 600 III EP Plus | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
| 1200 III EP | Parport | unsupported | Probably not supported. quarlewm at jmu dot edu offers to temporarily loan such a scanner to anyone who is interested in writing a driver. |
unsupported
(2005-07-30) |
? |
| 1800 A3 Pro-1 | USB | unsupported | Not supported but someone wants to start writing a backend. See link. Vendor/Product ids: 0x055f/0x0401. No information about this scanner on any Mustek website. |
unsupported
(2005-07-30) |
? |
| 2400 M | USB | unsupported | Probably unsupported. No details known. |
unsupported
(2005-07-30) |
? |
| BearPaw 1200 | USB | complete | both product versions are supported, see backends' man-page |
plustek
(0.49) |
sane-plustek |
| BearPaw 1200 CS | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| BearPaw 1200 CU | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| BearPaw 1200 CU Plus | USB | good | Procuct id 0x021b. |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 1200 CU Plus | USB | good | Product id 0x021c |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 1200 F | USB | good | Works upto 600 dpi. No support for TA and ADF yet. |
ma1509
(1.0-3) |
sane-ma1509 |
| BearPaw 1200 TA | USB | good | Transparency adapter supported |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 1248CU | USB | unsupported | Probably unsupported. No details known. |
unsupported
(2005-07-30) |
? |
| BearPaw 2400 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| BearPaw 2400 CS | USB | untested | Probably works, reports are welcome |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 2400 CS Plus | USB | good | Works, problems with 12/16 bit modes? |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 2400 CU | USB | basic | Works, but is slow |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 2400 CU Plus | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| BearPaw 2400 TA | USB | good | Transparency adapter supported |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 2400 TA Plus | USB | good | Transparency adapter supported |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 2400 TA Pro | USB | unsupported | Not supported. See link for some information. |
unsupported
(2005-07-30) |
? |
| BearPaw 2448 CS Plus | USB | basic | Same as 2448 TA Plus, but without TA. |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 2448 CU Pro | USB | unsupported | Not supported. See link for some information. |
unsupported
(2005-07-30) |
? |
| BearPaw 2448 TA Plus | USB | basic | Transparency adapter supported. Slow. Brightness depends on resolution? |
gt68xx
(1.0-71) |
sane-gt68xx |
| BearPaw 2448 TA Pro | USB | unsupported | Not supported. See link for some information. |
unsupported
(2005-07-30) |
? |
| BearPaw 4800 TA Pro | USB | unsupported | Not supported. See link for some information. |
unsupported
(2005-07-30) |
? |
| BearPaw 4800 TA Pro II | USB | unsupported | Not supported. See link for some information. |
unsupported
(2005-07-30) |
? |
| P 3600 A3 Pro | USB | unsupported | Not supported. Maybe similar to the 1800 A3 Pro-1?. See link. |
unsupported
(2005-07-30) |
? |
| Paragon 600 II CD | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon 600 II ED | Parport | untested | Completely untested. If it's the same as the 600 II EP, it may work. Please contact me if you own such a device. |
mustek
(1.0-138) |
sane-mustek |
| Paragon 600 II EP | Parport | untested | Not tested yet but should work. Please contact me if you own such a device. |
mustek
(1.0-138) |
sane-mustek |
| Paragon 600 II N | Proprietary | basic | Resolutions above 300 dpi may cause trouble. |
mustek
(1.0-138) |
sane-mustek |
| Paragon 800 II EP | Parport | unsupported | Not supported. Maybe similar to 600 II EP (SCSI_over-parport)? In this case it could be supported by the mustek SCSI backend. |
unsupported
(2005-07-30) |
? |
| Paragon 800 II SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon 1200 A3 Pro | SCSI | complete | ADF and TA untested. Please contact me if you own such equipment. |
mustek
(1.0-138) |
sane-mustek |
| Paragon 1200 III SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon 1200 LS | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon 1200 SP Pro | SCSI | good |
mustek
(1.0-138) |
sane-mustek | |
| Paragon MFC-600S | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon MFC-800S | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon MFS-1200SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon MFS-6000CX | SCSI | good | 3-pass |
mustek
(1.0-138) |
sane-mustek |
| Paragon MFS-6000SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon MFS-8000SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Paragon MFS-12000CX | SCSI | good | 3-pass |
mustek
(1.0-138) |
sane-mustek |
| Paragon MFS-12000SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| Plug-n-Scan 2400 M | USB | good | Works but is slow in high resolutions. Same as BearPaw 2400 CS Plus. |
gt68xx
(1.0-71) |
sane-gt68xx |
| Plug-n-Scan 2400 MT | USB | good | Works but is slow in high resolutions. Same as BearPaw 2400 TA Plus. |
gt68xx
(1.0-71) |
sane-gt68xx |
| ScanExpress 600 CP | Parport (EPP) | good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| ScanExpress 600 CU | USB | complete |
mustek_usb
(1.0-18) |
sane-mustek_usb | |
| ScanExpress 600 SEP | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
| ScanExpress 600 USB | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x873. Programming information is available. |
unsupported
(2005-07-30) |
? |
| ScanExpress 1200 CP | Parport (EPP) | good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| ScanExpress 1200 CP+ | Parport (EPP) | good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| ScanExpress 1200 CU | USB | complete |
mustek_usb
(1.0-18) |
sane-mustek_usb | |
| ScanExpress 1200 CU Plus | USB | complete |
mustek_usb
(1.0-18) |
sane-mustek_usb | |
| ScanExpress 1200 FS | SCSI | untested | One report that it crashes the computer. SCSI driver issue? Please contact me if you own such a device. |
mustek
(1.0-138) |
sane-mustek |
| ScanExpress 1200 UB | USB | complete | For the UB Plus, see gt68xx backend |
mustek_usb
(1.0-18) |
sane-mustek_usb |
| ScanExpress 1200 UB Plus | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| ScanExpress 1200 USB | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x0003. Programming information is available. |
unsupported
(2005-07-30) |
? |
| ScanExpress 1200 USB Plus | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x0007. |
unsupported
(2005-07-30) |
? |
| ScanExpress 1248 UB | USB | complete |
gt68xx
(1.0-71) |
sane-gt68xx | |
| ScanExpress 2400 USB | USB | minimal | Should be detected but may need some more work in the code. Testers welcome. |
gt68xx
(1.0-71) |
sane-gt68xx |
| ScanExpress 6000 P | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
| ScanExpress 6000SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| ScanExpress 12000 P | Parport | unsupported | Not supported. Asic 1505/05. |
unsupported
(2005-07-30) |
? |
| ScanExpress 12000SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| ScanExpress 12000SP Plus | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| ScanExpress A3 EP | Parport | unsupported | Not supported. Maybe it will be supported by the mustek_pp backend in future. |
unsupported
(2005-07-30) |
? |
| ScanExpress A3 SP | SCSI | basic | Please test! |
mustek
(1.0-138) |
sane-mustek |
| ScanExpress A3 USB | USB | basic | Still some vertical stripes. |
gt68xx
(1.0-71) |
sane-gt68xx |
| ScanExpress CardSmart | USB | unsupported | Probably unsupported. USB business card scanner. Maybe works as USB storage device? |
unsupported
(2005-07-30) |
? |
| ScanMagic 600 CP | Parport (EPP) | good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| ScanMagic 600 II SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| ScanMagic 1200 UB Plus | USB | good | Same as ScanExpress 1200 UB Plus |
gt68xx
(1.0-71) |
sane-gt68xx |
| ScanMagic 4800 P | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
| ScanMagic 4830S | SCSI | untested | sub model VM3575 |
teco2
(1.0-9) |
sane-teco2 |
| ScanMagic 9636P | Parport | unsupported | Probably not supported. Same as Mustek 12000 P?. ASIC 1505. |
unsupported
(2005-07-30) |
? |
| ScanMagic 9636S | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| ScanMagic 9636S Plus | SCSI | complete |
mustek
(1.0-138) |
sane-mustek | |
| TwainScan II SP | SCSI | complete |
mustek
(1.0-138) |
sane-mustek |
Link(s):
http://www.nevt.co.jp/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| PC-IN500/4C | SCSI | good | PC-IN500/4C was sold only in JAPAN |
nec
(0.12) |
sane-nec |
| Petiscan | USB | unsupported | Most probably unsupported. See link for details. Vendor ID is 0x0475 (Relisys/Teco). Not know if it is similar to other Relisys/Teco USB scanners. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Easy Plus 30 Bit | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.nikon.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| AX-110 / Scantouch 110 | SCSI | untested | may work, please test and give feedback |
umax
(1.0-41) |
sane-umax |
| AX-210 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Coolscan V ED | USB | unsupported | Most probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| LS 30 | SCSI | complete | working -- model available to developer |
coolscan2
(0.1.8) |
sane-coolscan2 |
| LS 40 ED | USB | complete |
coolscan2
(0.1.8) |
sane-coolscan2 | |
| LS 50 ED | USB | unsupported | Most probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| LS 2000 | SCSI | good |
coolscan2
(0.1.8) |
sane-coolscan2 | |
| LS 4000 ED | IEEE-1394 | good | needs linux kernel 2.4.19 or later |
coolscan2
(0.1.8) |
sane-coolscan2 |
| LS 8000 ED | IEEE-1394 | good | needs linux kernel 2.4.19 or later |
coolscan2
(0.1.8) |
sane-coolscan2 |
| LS-20 | SCSI | basic | The LS-20 has been replaced by the LS-30 |
coolscan
(0.4.3) |
sane-coolscan |
| LS-30 | SCSI | basic | alpha: only 24/30 bit RGB + 32/40 bit RGBI |
coolscan
(0.4.3) |
sane-coolscan |
| LS-1000 | SCSI | basic | Doesn't support gamma correction |
coolscan
(0.4.3) |
sane-coolscan |
| LS-2000 | SCSI | basic | alpha: only 24/36 bit + RGB 32/48 bit RGBI |
coolscan
(0.4.3) |
sane-coolscan |
| Super Coolscan LS-5000 ED | USB | unsupported | Most probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.olivetti.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Job-Jet M400 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.olympus.com
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| ES-10S | SCSI | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| PhotoMaker 3 | Parport | unsupported | Probably not supported. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Diamond 1200 | USB | good | Similar to Mustek BearPaw 1200 (Plus) |
gt68xx
(1.0-71) |
sane-gt68xx |
| Diamond 1200 Plus | USB | good | Product id 0x021b. Similar to Mustek BearPaw 1200 Plus |
gt68xx
(1.0-71) |
sane-gt68xx |
| Diamond 1200 Plus | USB | good | Product id 0x021c. Similar to Mustek BearPaw 1200 Plus |
gt68xx
(1.0-71) |
sane-gt68xx |
| Diamond 2450 | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx |
Link(s):
http://www.panasonic.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| KV-S2025C | SCSI | minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita |
| KV-S2026C | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S2045C | SCSI | minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita |
| KV-S2046C | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S2055L | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S2055W | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S2065L | SCSI | minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita |
| KV-S2065W | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S3065CL | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S3065CW | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S3085 | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S3105C | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S6040W | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S6045W | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S6050W | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S6055W | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-S7065C | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| KV-SS25 | SCSI | complete |
matsushita
(1.0-7) |
sane-matsushita | |
| KV-SS25D | SCSI | complete |
matsushita
(1.0-7) |
sane-matsushita | |
| KV-SS50 | SCSI | untested |
matsushita
(1.0-7) |
sane-matsushita | |
| KV-SS50EX | SCSI | untested |
matsushita
(1.0-7) |
sane-matsushita | |
| KV-SS55 | SCSI | untested |
matsushita
(1.0-7) |
sane-matsushita | |
| KV-SS55EX | SCSI | minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita |
| KV-SS850 | SCSI | untested |
matsushita
(1.0-7) |
sane-matsushita | |
| KV-SS855 | SCSI | untested |
matsushita
(1.0-7) |
sane-matsushita | |
| KV-SS905C | ? | unsupported | might be supported by matsushita backend. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DSmobile USB | USB | unsupported | Probably not supported. Some information is available. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.scanace.com/
Comment: Pacific Image Electronics
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Powerslide 3600 | USB IEEE-1394 | unsupported | Probably unsupported. Film scanner that can scan directly from the magazine. |
unsupported
(2005-07-30) |
? |
| Primefilm 1800u | USB | unsupported | Not supported. Vendor/product 0x05e3/0x0120. See link for details. |
unsupported
(2005-07-30) |
? |
| Primefilm 3600PRO | USB IEEE-1394 | unsupported | Probably not supported. |
unsupported
(2005-07-30) |
? |
| ScanAce 630S | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce 636S | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce 1230S | SCSI | good |
pie
(1.0) |
sane-pie | |
| ScanAce 1236S | SCSI | good |
pie
(1.0) |
sane-pie | |
| ScanAce II | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce II Plus | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce III | SCSI | good |
pie
(1.0) |
sane-pie | |
| ScanAce III Plus | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce Plus | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce ScanMedia | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce ScanMedia II | SCSI | untested |
pie
(1.0) |
sane-pie | |
| ScanAce V | SCSI | untested |
pie
(1.0) |
sane-pie |
Link(s):
http://www.image-land.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Splendeur 3024 | SCSI | good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 |
Link(s):
http://www.plustek.com/, http://www.plustek.de/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| OptiCard 600+ | USB | unsupported | Business card reader. No further information available. |
unsupported
(2005-07-30) |
? |
| OpticBook 3600 | USB | unsupported | GL842 based (similar to GL841?), maybe ca be added to genesys backend. Bookscanner. |
unsupported
(2005-07-30) |
? |
| OpticFilm 7200 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticPro 600P/6000P | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 1212U | USB | basic |
u12
(0.02) |
sane-u12 | |
| OpticPro 1236P | Parport (SPP, EPP) | complete | reported as OpticPro 12000P/96000P |
plustek_pp
(0.43) |
sane-plustek_pp |
| OpticPro 1248U | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| OpticPro 2400SP | SCSI | untested | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 |
| OpticPro 4800P | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 4830P | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 4831P | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 9600P | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 9630P | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 9630PL | Parport (SPP, EPP) | complete | use driver-switch mov=1 |
plustek_pp
(0.43) |
sane-plustek_pp |
| OpticPro 9636P | Parport (SPP, EPP) | complete | use driver-switch mov=4 |
plustek_pp
(0.43) |
sane-plustek_pp |
| OpticPro 9636P+/Turbo | Parport (SPP, EPP) | complete | use driver-switch mov=3 |
plustek_pp
(0.43) |
sane-plustek_pp |
| OpticPro 9636T | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 12000P/96000P | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 12000T | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro 19200S | SCSI | complete | rebadged Artec AM12S |
artec
(unmaintained) |
sane-artec |
| OpticPro A3U | USB | unsupported | Uses Plustek ASIC P99002 |
unsupported
(2005-07-30) |
? |
| OpticPro AI3 | Parport (SPP, EPP) | basic | use driver-switch mov=5, poor picture quality |
plustek_pp
(0.43) |
sane-plustek_pp |
| OpticPro P8 | Parport | untested |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro P12 | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro PT12 | Parport (SPP, EPP) | complete |
plustek_pp
(0.43) |
sane-plustek_pp | |
| OpticPro S6 | USB | unsupported | Uses RealTek chipset (RTL8801D) |
unsupported
(2005-07-30) |
? |
| OpticPro S12 | USB | unsupported |
unsupported
(2005-07-30) |
? | |
| OpticPro S24 | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticPro S28 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticPro ST12 | USB | unsupported |
unsupported
(2005-07-30) |
? | |
| OpticPro ST16 | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticPro ST24 | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticPro ST28 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticPro ST48 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticPro ST64 | USB | unsupported | No further information available. |
unsupported
(2005-07-30) |
? |
| OpticPro U12 | USB | basic | Note: Only devices with product ID 0x0001 are supported! |
u12
(0.02) |
sane-u12 |
| OpticPro U12 | USB | complete | NOTE: Devices with product ID 0x0001 are not supported! |
plustek
(0.49) |
sane-plustek |
| OpticPro U16B | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| OpticPro U16B+ | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| OpticPro U24 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| OpticPro UA18 | USB | unsupported | Probably LM983x based. |
unsupported
(2005-07-30) |
? |
| OpticPro UT12 | USB | basic | Note: Only devices with product ID 0x0001 are supported! |
u12
(0.02) |
sane-u12 |
| OpticPro UT12 | USB | complete | Note: Devices with product ID 0x0001 are not supported! |
plustek
(0.49) |
sane-plustek |
| OpticPro UT16 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| OpticPro UT16B | USB | untested | Probably works. Transparency adapter not supported yet. Please contact me if you own such a device. |
gt68xx
(1.0-71) |
sane-gt68xx |
| OpticPro UT24 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| OpticSlim 1200 | USB | good |
gt68xx
(1.0-71) |
sane-gt68xx | |
| OpticSlim 2400 | USB | good | Works up to 1200 dpi. |
gt68xx
(1.0-71) |
sane-gt68xx |
| OpticSlim 2420 | USB | unsupported | GL841 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OpticSlim M12 | USB | unsupported | Uses the GT6816 chipset. May be supported by the gt68xx backend in future. See link for details. |
unsupported
(2005-07-30) |
? |
| OpticWorks 2000 | Parport | unsupported | Multifunction device. No further information available. |
unsupported
(2005-07-30) |
? |
| Spectra ADF | Proprietary | unsupported | Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner? |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.primax.nl/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Colorado 600U | USB | unsupported | Not supported. Some information is available. |
unsupported
(2005-07-30) |
? |
| Colorado 2400U | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Colorado 4800 | Parport (SPP, EPP) | untested | same as OpticPro 4800P |
plustek_pp
(0.43) |
sane-plustek_pp |
| Colorado Direct 600 | Parport | unsupported | Not supported. However, a stand-alone program is available. |
unsupported
(2005-07-30) |
? |
| Colorado Direct 9600 | Parport | unsupported | Not supported. However, a stand-alone program is available. |
unsupported
(2005-07-30) |
? |
| Colorado USB 9600 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Compact 4800 Direct | Parport (SPP, EPP) | complete | use driver-switch mov=2 |
plustek_pp
(0.43) |
sane-plustek_pp |
| Compact 4800 Direct-30 | Parport (SPP, EPP) | complete | same as OpticPro 4830P, use driver-switch mov=7 |
plustek_pp
(0.43) |
sane-plustek_pp |
| Compact 4800 SCSI | SCSI | complete | Mustek 600 II CD compatible |
mustek
(1.0-138) |
sane-mustek |
| Compact 9600 Direct-30 | Parport (SPP, EPP) | complete | same as OpticPro 9630P |
plustek_pp
(0.43) |
sane-plustek_pp |
| Jewel 4800 | SCSI | good | sub model VM356A |
teco2
(1.0-9) |
sane-teco2 |
| OneTouch 5300 | Parport | unsupported | Not supported. |
unsupported
(2005-07-30) |
? |
| Primascan Colorado 2600u | USB | unsupported | Unsupported. Same as Visioneer Onetouch 4400. See link for details. |
unsupported
(2005-07-30) |
? |
| Profi 9600 | SCSI | basic | sub model VM6575 |
teco2
(1.0-9) |
sane-teco2 |
| Profi 19200 | SCSI | good | sub model VM6586 |
teco2
(1.0-9) |
sane-teco2 |
| Slim-Line 1200 | USB | unsupported | Maybe GL646. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.fida.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Winscan Pro 2448U | USB | unsupported | Not supported. Some information is available. Vendor=0x06dc product=0x0014. RealTek RTS8801. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.quato.de/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| X-Finity | SCSI | unsupported | Probably not supported. No details yet. Originally manufactured by PFU? |
unsupported
(2005-07-30) |
? |
| X-Finity Ultra | USB IEEE-1394 | unsupported | Probably not supported. No details yet. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DigitDia 3600 | USB IEEE-1394 | unsupported | GL841 based, to be added to genesys backend. Film scanner that can scan directly from the magazine. |
unsupported
(2005-07-30) |
? |
| iScan 1800 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| ProScan 4000 | USB IEEE-1394 | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.relisys.com/, http://www.tecoimage.com.tw/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| APOLLO Express 3 | SCSI | basic | sub model VM356A |
teco2
(1.0-9) |
sane-teco2 |
| APOLLO Express 6 | SCSI | good | sub model VM6565 |
teco2
(1.0-9) |
sane-teco2 |
| AVEC 2400 | SCSI | complete | sub model VM3520 |
teco1
(1.0-10) |
sane-teco1 |
| AVEC 2412 | SCSI | complete | sub model VM3520+ |
teco1
(1.0-10) |
sane-teco1 |
| AVEC 4800 | SCSI | untested | sub model VM4530 |
teco1
(1.0-10) |
sane-teco1 |
| AVEC 4816 | SCSI | untested | sub model VM4530+ |
teco1
(1.0-10) |
sane-teco1 |
| AVEC II S3 | SCSI | good | sub model VM3564 |
teco2
(1.0-9) |
sane-teco2 |
| AVEC Super 3 | SCSI | untested | sub model VM3575 |
teco2
(1.0-9) |
sane-teco2 |
| Eclipse 1200U | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Episode | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Infinity Scorpio | SCSI | good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 |
| RELI 2400 | SCSI | untested | sub model VM3530 |
teco1
(1.0-10) |
sane-teco1 |
| RELI 2412 | SCSI | complete | sub model VM3530+ |
teco1
(1.0-10) |
sane-teco1 |
| RELI 4816 | SCSI | complete | sub model VM4540 |
teco1
(1.0-10) |
sane-teco1 |
| RELI 4830 | SCSI | good | sub model VM4542 |
teco1
(1.0-10) |
sane-teco1 |
| RELI 9600 | SCSI | untested | sub model VM6530 |
teco1
(1.0-10) |
sane-teco1 |
| RELI 9612 | SCSI | untested | sub model VM6530* |
teco1
(1.0-10) |
sane-teco1 |
| RELI 9624 | SCSI | untested | sub model VM6530+ |
teco1
(1.0-10) |
sane-teco1 |
| RELI 9630 | SCSI | untested | sub model VM6540 |
teco1
(1.0-10) |
sane-teco1 |
| RELI DS6 | SCSI | untested | sub model VM3420 |
teco1
(1.0-10) |
sane-teco1 |
| RELI DS15 | SCSI | untested | sub model VM3440 |
teco1
(1.0-10) |
sane-teco1 |
| SCORPIO Pro | SCSI | good | sub model VM6575 |
teco2
(1.0-9) |
sane-teco2 |
| SCORPIO Pro-S | SCSI | untested | sub model VM6586 |
teco2
(1.0-9) |
sane-teco2 |
| SCORPIO Super 3 | SCSI | good | sub model VM3575 |
teco2
(1.0-9) |
sane-teco2 |
| Scorpio Ultra 3 | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 19200i | USB | good | Similar to Plustek OpticPro 1248U |
gt68xx
(1.0-71) |
sane-gt68xx |
| RevScan Orange R48Ti | USB | basic | Rebadged Plustek OpticPro UT12 |
u12
(0.02) |
sane-u12 |
Link(s):
http://www.ricoh.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| IS-410 | SCSI | untested | Untested, please report! |
ibm
(1.0-4) |
sane-ibm |
| IS-420 | SCSI | basic | Works at least in flatbed mode. |
ibm
(1.0-4) |
sane-ibm |
| IS-430 | SCSI | untested | Untested, please report! |
ibm
(1.0-4) |
sane-ibm |
| Ricoh IS50 | SCSI | basic |
ricoh (unmaintained) |
sane-ricoh | |
| Ricoh IS60 | SCSI | basic |
ricoh (unmaintained) |
sane-ricoh |
Link(s):
http://www.scanport.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| SQ300 | Parport? | basic |
microtek2
(0.96) |
sane-microtek2 | |
| SQ2030 | Parport | basic |
microtek2
(0.96) |
sane-microtek2 | |
| SQ4836 | SCSI | basic |
microtek2
(0.96) |
sane-microtek2 |
Link(s):
http://www.sceptre.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Vividscan S1200 | SCSI | basic |
sceptre
(1.0-10) |
sane-sceptre |
Link(s):
http://sharp-world.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| JX-250 | SCSI | good |
sharp
(0.32) |
sane-sharp | |
| JX-320 | SCSI | good |
sharp
(0.32) |
sane-sharp | |
| JX-325 | SCSI | untested |
sharp
(0.32) |
sane-sharp | |
| JX-330 | SCSI | good |
sharp
(0.32) |
sane-sharp | |
| JX-350 | SCSI | good |
sharp
(0.32) |
sane-sharp | |
| JX-610 | SCSI | good |
sharp
(0.32) |
sane-sharp |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DMS 2000 | proprietary | unsupported | Not supported until now. Work on a backend has started, contact the author for details (see link) |
unsupported
(2005-07-30) |
? |
| SmartScan 3600 | USB IEEE-1394 | unsupported | Probably not supported. Same as PIE Primefilm 2600 PRO. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.siemens.com/, http://www.siemens.de/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 9036 Flatbed scanner | SCSI | basic |
s9036 (unmaintained) |
sane-s9036 | |
| S9036 | SCSI | untested | gray only |
agfafocus (unmaintained) |
sane-agfafocus |
| ST400 | SCSI | basic | 6 bit gray |
st400
(1.6) |
sane-st400 |
| ST800 | SCSI | basic | 6 bit gray |
st400
(1.6) |
sane-st400 |
Comment: Spot seems have gone out of business.
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Maxiscan A4 | proprietary | unsupported | Not supported until now. Work on a backend has started, see link for more information. |
unsupported
(2005-07-30) |
? |
| ScanTak 2c | proprietary | unsupported | Not supported. Work on a backend has started, see link for more information. |
unsupported
(2005-07-30) |
? |
| ScanTak 3c | proprietary | unsupported | Not supported. Work on a backend has started, see link for more information. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| TravelScan 460/464 | USB | unsupported | Not supported. Some information is available. See link for details. |
unsupported
(2005-07-30) |
? |
| TravelScan FS-531 | USB | unsupported | Not supported. May work with the Plustek backend in future. See link for details. |
unsupported
(2005-07-30) |
? |
| TravelScan Pro | USB | unsupported | Probably not supported. Some information is available. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Artiscan 6000C | SCSI | good | 3 pass, 300 DPI |
tamarack (unmaintained) |
sane-tamarack |
| Artiscan 8000C | SCSI | good | 3 pass, 400 DPI |
tamarack (unmaintained) |
sane-tamarack |
| Artiscan 9600 | Parport | unsupported | Unsupported at the moment. See link for a project for that scanner taht may support it in future. |
unsupported
(2005-07-30) |
? |
| Artiscan 9600 pro 36 | Parport | unsupported | Unsupported at the moment. See link for a project for that scanner. |
unsupported
(2005-07-30) |
? |
| Artiscan 12000C | SCSI | good | 3 pass, 600 DPI |
tamarack (unmaintained) |
sane-tamarack |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Funline TS6 EP | Parport (EPP) | good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| Funline TS12 EP | Parport (EPP) | good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.tce.com.br/
Comment: Brasilian vendor.
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| MK600U | USB | unsupported | Not supported. Some information is available. |
unsupported
(2005-07-30) |
? |
| S450 | Parport | unsupported | Not supported by SANE but is reported to work with pxscan (see link). |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.tecoimage.com.tw/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| VM6509F | USB | unsupported | Probably unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| FU661E | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.nikon.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| PowerScanII | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
Link(s):
http://www.trust-site.com, http://www.trust-site.com/home/
Comment: Carefully check the model names. Trust uses similar names for completely different hardware.
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 240TH Easy Webscan Gold | USB | good | Same as Mustek Bearpaw 2400 TA plus. |
gt68xx
(1.0-71) |
sane-gt68xx |
| CombiScan 19200 | Parport USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Compact Scan USB 19200 | USB | complete | Mustek 1200 UB compatible |
mustek_usb
(1.0-18) |
sane-mustek_usb |
| Compact Scan USB 19200 | USB | good | Works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus) |
gt68xx
(1.0-71) |
sane-gt68xx |
| Easy Connect 9600+ | Parport (EPP) | good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| Easy Connect 19200+ | Parport (EPP) | good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
| Easy Webscan 19200 | USB | good | Different product id: 0x4006 |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
| Flat Scan USB 19200 | USB | good | Similar to Artec Ultima 2000 |
gt68xx
(1.0-71) |
sane-gt68xx |
| Imagery 1200 | SCSI | good | 3-pass, Mustek Paragon MFS-6000CX compatible |
mustek
(1.0-138) |
sane-mustek |
| Imagery 1200 SP | SCSI | complete | Mustek Paragon MFS-6000SP compatible |
mustek
(1.0-138) |
sane-mustek |
| Imagery 2400 SP | SCSI | good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 |
| Imagery 4800 SP | SCSI | complete | Mustek Paragon 600 II CD compatible |
mustek
(1.0-138) |
sane-mustek |
| Imagery 4800 SP+ | SCSI | good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 |
| Imagery 9600 SP | SCSI | untested | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 |
| SCSI Connect 19200 | SCSI | complete | Mustek ScanExpress 12000SP compatible |
mustek
(1.0-138) |
sane-mustek |
| SCSI excellence series 19200 | SCSI | complete | Mustek ScanExpress 12000SP compatible |
mustek
(1.0-138) |
sane-mustek |
| SCSI Scan 19200 -Excellence Series- | SCSI | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.umax.com/, http://www.umax.com.tw/, http://www.umax.de/en, http://www.umax-europe.com, http://www.umaxjapan.co.jp, http://www.umax.com.cn
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Astra 600P | Parport (SPP/ECP) | unsupported | untested, but should be close to 610P |
umax_pp
(1) |
sane-umax_pp |
| Astra 600S | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Astra 610P | Parport (SPP/ECP) | good |
umax_pp
(1) |
sane-umax_pp | |
| Astra 610S | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Astra 1200S | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Astra 1220P | Parport (EPP/ECP) | good |
umax_pp
(1) |
sane-umax_pp | |
| Astra 1220S | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Astra 1220U | USB | good | OK |
umax1220u
(1.0.1) |
sane-umax1220u |
| Astra 1600P | Parport (EPP/ECP) | good |
umax_pp
(1) |
sane-umax_pp | |
| Astra 1600U | USB | minimal | Is reported to be the same as the 2000U. Sort of scans, but colors all messed up. |
umax1220u
(1.0.1) |
sane-umax1220u |
| Astra 2000P | Parport (EPP/ECP) | good |
umax_pp
(1) |
sane-umax_pp | |
| Astra 2000U | USB | minimal | Sort of scans, but colors all messed up. |
umax1220u
(1.0.1) |
sane-umax1220u |
| Astra 2100 U | USB | minimal | Colours are distorted, there are vertical colour stripes, and the image is shadowed inches to its left. |
umax1220u
(1.0.1) |
sane-umax1220u |
| Astra 2100S | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Astra 2200 (SU) | USB | good | OK, needs USB control messages |
umax
(1.0-41) |
sane-umax |
| Astra 2200 (SU) | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Astra 2400S | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Astra 3000 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Astra 3400 | USB | unsupported | Model ID 0x0050 not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Astra 3600 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Astra 4000 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Astra 4400 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Astra 4450 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Astra 4500 | USB | unsupported | GL646 based, to be added to genesys backend. Avision iVina FB1600 clone |
unsupported
(2005-07-30) |
? |
| Astra 4600 | USB | unsupported | Probably not supported, no details known. |
unsupported
(2005-07-30) |
? |
| Astra 4700 | USB | unsupported | GL646/GL660 based. Avision iVina FB1800 clone. |
unsupported
(2005-07-30) |
? |
| Astra 6400 | IEEE-1394 | unsupported | will propably work one day |
umax
(1.0-41) |
sane-umax |
| Astra 6450 | IEEE-1394 | unsupported | will propably work one day |
umax
(1.0-41) |
sane-umax |
| Astra 6700 | USB | unsupported | Not supported. No chipset information available. Same as Avision iVina FB2400. |
unsupported
(2005-07-30) |
? |
| Astra MX3 | USB | good | OK, needs USB control messages |
umax
(1.0-41) |
sane-umax |
| Astra MX3 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| AstraSlim | USB | unsupported | Probably not supported currently. See link for more details. |
unsupported
(2005-07-30) |
? |
| AstraSlim 1200 SE | USB | unsupported | Probably not supported currently. May be supported in future. See link for more details. |
unsupported
(2005-07-30) |
? |
| AstraSlim 6000 | USB | unsupported | Probably not supported currently. See link for more details. |
unsupported
(2005-07-30) |
? |
| AstraSlim SE | USB | good | Different product id: 0x4009 |
artec_eplus48u
(0.0.10) |
sane-artec_eplus48u |
| Gemini D-16 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Mirage D-16L | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Mirage II | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Mirage IIse | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| PL-II | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| PowerLook | SCSI | good | OK, SCSI-ID=PS-2400X |
umax
(1.0-41) |
sane-umax |
| Powerlook 180 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| PowerLook 270 | SCSI | unsupported | incompatible |
umax
(1.0-41) |
sane-umax |
| PowerLook 270plus | SCSI | unsupported | incompatible |
umax
(1.0-41) |
sane-umax |
| Powerlook 1000 USB | USB | unsupported | Probably not supported. No further information available. |
unsupported
(2005-07-30) |
? |
| PowerLook 1100 | IEEE-1394 | unsupported | will propably work one day |
umax
(1.0-41) |
sane-umax |
| PowerLook 2000 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| PowerLook 2100XL | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| PowerLook 3000 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| PowerLook III | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| PSD | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Supervista S-12 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| UC 630 | SCSI | good | Version 2.8 OK, others only lineart OK |
umax
(1.0-41) |
sane-umax |
| UC 840 | SCSI | good | Version 1.6 OK, others only lineart OK |
umax
(1.0-41) |
sane-umax |
| UC 1200S | SCSI | untested | may work, please test and give feedback |
umax
(1.0-41) |
sane-umax |
| UC 1200SE | SCSI | good | Version 3.0 OK, others unknown |
umax
(1.0-41) |
sane-umax |
| UC 1260 | SCSI | good | Version 1.6 OK, others unknown |
umax
(1.0-41) |
sane-umax |
| UG 80 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| UG 630 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| UMAX 3400 | USB | complete | there are some UMAX 3400 outside the U.S. which are not supported, as they use another chipset than the LM983x |
plustek
(0.49) |
sane-plustek |
| UMAX 3450 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| UMAX 5400 | USB | complete |
plustek
(0.49) |
sane-plustek | |
| UMAX Astranet ia101 | USB | complete | seems to be a renamed UMAX 3400 |
plustek
(0.49) |
sane-plustek |
| UMAX S-6E | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| UMAX S-6EG | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| UMAX S-12 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| UMAX S-12G | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| UMAX VT600 | SCSI | untested | may work, please test and give feedback |
umax
(1.0-41) |
sane-umax |
| Vista S6 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Vista S6E | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Vista-S8 | SCSI | good | OK |
umax
(1.0-41) |
sane-umax |
| Vista-T630 | SCSI | good | OK for some firmwareversions, on others only lineart OK |
umax
(1.0-41) |
sane-umax |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 3000 | USB | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
Link(s):
http://www.visioneer.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 6200 | USB | unsupported | Not supported. Is reported to use the E5 chipset. Uses a Primax ID. See link for some details. Looks similar to Primascan Colorado 2600u. |
unsupported
(2005-07-30) |
? |
| Onetouch 4400 | USB | unsupported | Not supported. E5 chipset? Vendor/product 0x0461/0x0347.See link for more details. |
unsupported
(2005-07-30) |
? |
| OneTouch 4800 USB | USB | unsupported | Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details. |
unsupported
(2005-07-30) |
? |
| OneTouch 5300 USB | USB | unsupported | Not supported. Vendor/product ids 0x04a7/0x0226. Chipset is RTS8801B(?). See link for output of /proc/bus/usb/devices. |
unsupported
(2005-07-30) |
? |
| OneTouch 5800 USB | USB | unsupported | Unsupported. 48 bit scanner, doesn't work with viceo backend. RTS8801C. Vendor/product 0x04a7/0x0226. |
unsupported
(2005-07-30) |
? |
| OneTouch 6600 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Onetouch 7100 | USB | unsupported | GL646 based, to be added to genesys backend |
unsupported
(2005-07-30) |
? |
| OneTouch 7300 | USB | good | Works upto 1200 dpi and 12 bits/color. |
gt68xx
(1.0-71) |
sane-gt68xx |
| OneTouch 8100 | USB | unsupported | Unsupported. See link for details. |
unsupported
(2005-07-30) |
? |
| Onetouch 8700 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Onetouch 8900 | USB | unsupported | Not supported. Same as 8920 but without TA? |
unsupported
(2005-07-30) |
? |
| Onetouch 8920 | USB | unsupported | Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. Chipset is RTS8801C. See link for output of /proc/bus/usb/devices. |
unsupported
(2005-07-30) |
? |
| Onetouch 9000 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Onetouch 9020 | USB | unsupported | Not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Onetouch Pro 8800 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Onetouch Pro 8820 | USB | unsupported | Probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| PaperPort 3100b | Parport | unsupported | Most probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| PaperPort 6100 | Parport | unsupported | Most probably not supported. More details would be appreciated. |
unsupported
(2005-07-30) |
? |
| PaperPort OneTouch | Parport | unsupported | Most probably not supported. See link for details. |
unsupported
(2005-07-30) |
? |
| Primascan Colorado 2600u | USB | unsupported | Not supported. See Visioneer Onetouch 4400. |
unsupported
(2005-07-30) |
? |
| Strobe XP 100 | USB | unsupported | Not supported but may work in future. See link for details. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Compact II | Parport (EPP) | good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.vobis.de/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| HighScan | SCSI | complete | only E3plus based models |
microtek2
(0.96) |
sane-microtek2 |
| Highscreen Realscan | SCSI | good |
microtek
(0.13.1) |
sane-microtek | |
| Highscreen Scanboostar Premium | SCSI | good | OK, SCSI-ID=LinoHell Office2 |
umax
(1.0-41) |
sane-umax |
Comment: Company was renamed to Benq.
Link(s):
http://www.xerox.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 2400 Onetouch | USB | unsupported | Probably GL646_HP based, maybe can be added to genesys backend |
unsupported
(2005-07-30) |
? |
| DocuImage 620S | SCSI | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
| DocuMate252 | USB | untested |
avision
(Build: 167) |
sane-avision | |
| DocuMate262 | USB | untested |
avision
(Build: 167) |
sane-avision | |
| WorkCentre 470cx | Parport | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
| WorkCentre M15i | USB | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
| WorkCentre PE16 | USB Parport | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
| WorkCentre Pro 412 | USB Parport | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
| WorkCentre XK35c | USB Parport | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
| WorkCentre XK50cx | USB | unsupported | Not supported. See link for more details. |
unsupported
(2005-07-30) |
? |
Manufacturers: Kodak, Polaroid
Link(s):
http://www.kodak.com/global/en/service/digCam/dc25/dc25.shtml, http://www.kodak.com/global/en/service/digCam/dc210/dc210.shtml, http://www.kodak.com/global/en/service/products/ekn006568.jhtml
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DC20 | Serial port | basic | DC-20 untested by author but reported to work |
dc25
(1.2) |
sane-dc25 |
| DC25 | Serial port | complete |
dc25
(1.2) |
sane-dc25 | |
| DC210 | Serial port | basic |
dc210
(0.0) |
sane-dc210 | |
| DC240 | Serial port | good | Use gphoto2 backend to get USB support |
dc240
(0.0) |
sane-dc240 |
Link(s):
http://www.polaroid.com/
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| DMC | SCSI | good |
dmc (unmaintained) |
sane-dmc |
Manufacturers: Biolux, Connectix, Grandtek Scopecam
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 654 (micrOcular) | USB | unsupported | Not supported yet. See link for more details. |
unsupported
(2005-07-30) |
? |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| Color QuickCam | Parport | good | Requires root privileges. |
qcam (unmaintained) |
sane-qcam |
| Greyscale QuickCam | Parport | minimal | Requires root privileges. Partly working. |
qcam (unmaintained) |
sane-qcam |
| Model | Interface | Status | Comment | Backend | Manpage |
|---|---|---|---|---|---|
| 8x30 Binocular & Digital Camera | USB | unsupported | Not Supported yet. See link for more details. |
unsupported
(2005-07-30) |
? |
Backends: gphoto2, pint, pnm, test, v4l
Link(s):
mailto:peter@fales-lorenz.net
Manual page: sane-gphoto2
Description: Multiple cameras supported by the gphoto2 libraries
Comment: The long-term plan is to support all the cameras supported by the gphoto2 libraries (currently over 140 models). However, at this stage, only a handful of cameras are definitely known to work with SANE. Other cameras will probably work if the native file format is EXIF or JPEG. Testers welcome!
Manual page: sane-pint
Description: Scanners with the machine-independent PINT interface
Comment: Haven't been tested for a long time. Handle with care.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-pnm
Description: Reads PNM files
Comment: Used for debugging frontends. Obsolete, use test backend instead.
Link(s):
http://www.meier-geinitz.de/sane/test-backend/
Manual page: sane-test
Description: Frontend-tester
Comment: Backend for testing frontends. Also serves as example for SANE backend options.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-v4l
Description: Interface to Video For Linux API
Comment: Supports video cameras and other devices accessed by the v4l kernel API, e.g. bttv devices. Quite a lot of known bugs.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-dll
Description: Dynamic loading of shared-library backends.
Link(s):
http://www.penguin-breeder.org/?page=sane-net
Manual page: sane-net
Description: Network access to saned servers
Comment: Can be used to access any scanner supported by SANE over the net. Supports IPv4 and IPv6.
- Model:
- Name of the the device.
- Interface:
- How the device is connected to the computer.
- Status:
- Indicates how many of the features the device provides are supported by SANE.
- unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
- untested means the device may be supported but couldn't be tested. Be very careful and report success/failure.
- minimal means that the device is detected and scans at least in one mode. But the quality is bad or important features won't work.
- basic means it works at least in the most important modes but quality is not perfect.
- good means the device is usable for day-to-day work. Some rather exotic features may be missing.
- complete means the backends supports everything the device can do.
- Comment:
- More information about the backend or model, e.g. the level of support and possible problems.
- Backend:
- Name of the backend, in parentheses if available: Version of backend/driver; newer versions may be available from their home sites.
NEW! means brand-new to the current release of SANE.
UNMAINTAINED means that nobody maintains that backend. Expect no new features or newly supported devices. You are welcome to take over maintainership.- Manual Page:
- A link to the man-page online, if it exists.
- Manufacturer:
- Manufacturer, vendor or brand name of the device.
- Description:
- The scope of application of the backend.