ISIS default, streams the pds labels out to take up as few bytes
as possible.
FIXED
Exports fixed labels
Exports the pds labels in a fixed label format. This fixed size
is derived from the number of bytes in each line of the exported
cube.
Output Settings:
BITTYPE
Description
Bit type of output:
8 bit (0=black, 255=white)
16 bit unsigned (0=black, 65535=white)
16 bit signed (-32767=black, 32768=white)
32 bit (1.17549435e-38=black, 3.40282347e+38=white)
Type
string
Default
32BIT
Option List:
Option
Brief
Description
8BIT
8 bit data
Pixels are in 8-bit data range (0 to 255).
Exclusions
ENDIAN
U16BIT
16 bit unsigned data
Pixels are in the 16-bit data range (0 to 65535)
S16BIT
16 bit signed data
Pixels are in 16 bit signed data range (-32768 to 32767)
32BIT
32 bit data
Pixels are in the 32 bit floating point data range
(-3.40282347e+38 to 3.40282347e+38)
Exclusions
STRETCH
MINPERCENT
MAXPERCENT
NULL
LRS
LIS
HIS
HRS
Output Settings:
NULL
Description
If set to true, the minimum value of the raw output data will be
reserved for null pixels. The actual value used for null pixels will
be denoted in the print.prt file as well as displayed onscreen.
Type
boolean
Default
true
Output Settings:
LRS
Description
If set to true, then an output DN value is set aside for the LRS input pixels.
The actual DN value used for LRS pixels will be denoted in the print.prt
file as well as displayed onscreen.
Type
boolean
Default
false
Output Settings:
LIS
Description
If set to true, then an output DN value is set aside for the LIS input pixels.
The actual DN value used for LIS pixels will be denoted in the print.prt
file as well as displayed onscreen.
Type
boolean
Default
false
Output Settings:
HIS
Description
If set to true, then an output DN value is set aside for the HIS input pixels.
The actual DN value used for HIS pixels will be denoted in the print.prt
file as well as displayed onscreen.
Type
boolean
Default
false
Output Settings:
HRS
Description
If set to true, then an output DN value is set aside for the HRS input pixels.
The actual DN value used for HRS pixels will be denoted in the print.prt
file as well as displayed onscreen.
Type
boolean
Default
false
Stretch Options:
STRETCH
Description
This parameter is used to select one of three ways to stretch
(or map) the input pixels. They are NONE, LINEAR, or MANUAL.
Type
string
Default
NONE
Option List:
Option
Brief
Description
NONE
No stretch
No stretch is performed.
Exclusions
MINIMUM
MAXIMUM
MINPERCENT
MAXPERCENT
LINEAR
Linear stretch
A minimum and maximum are automatically computed based on
the statistics of the selected input band. A histogram of the band
is used to pick the minimum at 0.5% of the data and the maximum
at 99.5% of the data. Input pixels less than or equal to the
minimum are stretched to black while pixels greater than the or
equal to the maximum are stretched to white. A linear mapping
occurs between the minimum and maximum.
Exclusions
MINIMUM
MAXIMUM
MANUAL
Manual stretch
This option allows you to pick your own stretch. You must
enter a value for MINIMUM and MAXIMUM input pixel.
Exclusions
MINPERCENT
MAXPERCENT
Inclusions
MINIMUM
MAXIMUM
Stretch Options:
MINIMUM
Description
The minimum input pixel value which will be mapped to black.
Type
double
Less Than
MAXIMUM
Stretch Options:
MAXIMUM
Description
The maximum input pixel value which will be mapped to white.
Type
double
Greater Than
MINIMUM
Stretch Options:
MINPERCENT
Description
The percentage of data in the histogram used to compute the minimum
pixel value in the stretch.
Type
double
Default
0.5
Less Than
MAXPERCENT
Stretch Options:
MAXPERCENT
Description
The percentage of data in the histogram used to compute the maximum
pixel value in the stretch.
Type
double
Default
99.5
Greater Than
MINPERCENT
Output Data Storage Order:
ENDIAN
Description
This parameter is used to select one whether the output will be
streamed starting with the most significant byte (MSB) or starting
with the least significant bytes (LSB). The choice should be made by
the user depending upon the format read by the system architecture
from which they plan to read the raw data.
Type
string
Default
LSB
Option List:
Option
Brief
Description
LSB
Least significant byte
The least significant byte will be the first byte output.
MSB
Most significant byte
The most significant byte will be the first byte output.
In this example isis2pds will convert a cube to a pds
format image.
GUI Screenshot
isis2pds GUI
Example GUI
Screenshot of GUI with FROM and TO files selected.
Input Image
Input Image
Input cube image
Parameter Name:
FROM
This is the input cube for the example of isis2pds.
Output Image
Output pds Image
Output pds image
Parameter Name:
TO
This is the exact same image with exact same DNs, but in
the pds format.
History
Noah Hilt
2008-05-20
Original version
Christopher Austin
2008-08-07
Added the Label Type capability (param)
Kristin Berry
2014-06-06
Changed to assume that radii without units in the input Isis cube are in meters, map scales without units are in meters/pixel, and map resolutions without units are in pixels/degree.